Tag Archives: STaSIS

STASIS TREATMENT TO THE AUDI A7

2011/10/13 evogarage

STaSIS Audi A7

In addition to the exhaust system which was covered yesterday, a suspension package was also installed tonight on the Audi A7. The STaSIS package included a set of touring lowering springs and a rear sway-bar.

Notes:
Suspension: Responsive and Refined – STaSIS carefully balances the interdependent systems of springs, sway bars, and dampers with ride height and alignment, drastically improving grip without sacrificing comfort.

Our Touring suspensions lower your stance for better weight transfer while maintaining the factory Drive Select functionality. We’ve engineered an increased spring rate to improve your car’s response, and high-performance roll bars for added corning group, giving you an introduction to the exotic performance experience. Our Street Sport suspensions, available for some models, add customizability, allowing you to adjust your ride height to meet your personal needs.

Our Challenge suspensions go a step further, unleashing your car’s ultimate potential. We use Ohlins SL coil-over technology and STaSIS double digressive valving for factory-level ride comfort with competition-level response to driver inputs, This suspension uses increased spring rates and anti-roll bars to improve driver response and reduce body roll. For the extreme enthusiast, we offer Motorsports suspensions for some models, giving you the ultimate in customization capability.

Intake & Exhaust

STASIS TOURING CHALLENGE EXHAUST SYSTEM

2011/10/12 evogarage

2012 Audi A7 STaSIS

Newly arrived are a bunch of pipes! Actually, it is the STaSIS exhaust system for the 2012 3.0 Audi A7.

Notes:
STaSIS exhausts are designed to reduce back pressure for more power and efficiency. You’ll have a powerful tone at full throttle that stays refined during your commute so you can take care of business while enjoying your ride.

Our lightweight, free-flowing, T304 stainless steel exhaust systems work in harmony with the engine tuning software. The mufflers incorporate reflective and passive technologies to optimize sound and minimize back pressure, while maintaining low levels of cabin resonance at cruising speeds.

Combined with tunable resonators, the sound is noticeably deeper and more aggressive without intruding in the cabin during normal driving conditions. You’ll experience a number of benefits:

Optimized sound – Resonators and mufflers combine to give an exhaust tone that is perceptibly deeper and stronger with an aggressive throttle, without intrusive cabin noise at cruising speeds.

Optimized performance – Our exhausts add horsepower to your vehicle. For even more performance gains, combine an exhaust with STaSIS engine software.

Tunable resonators – Some models offer customer-tunable resonators to customize the sound to your personal ideal.

Compatibility and ease of install — STaSIS exhaust systems are designed to work in concert with our other performance products., and offer a direct bolt-in replacement for the factory exhaust. No welding or fabrication is required. Our two-piece, long-length design provides out-of-the-box fitment, without needing multiple adjustments or customization.

Engine & Drivetrain

VW MKV GTI TURBO UPGRADE FROM STASIS

2009/01/17 evogarage

alcon monobloc

STaSIS 2.0T Turbo Upgrade – $4,999.00 USD

STaSIS’ Power Kit minimizes turbo lag by replacing the OEM turbocharger with a larger, more efficient assembly. Use of pulse matching technology, like that found in twin scroll designed turbochargers, allows higher air flow rates at lower engine speeds. High flow fuel injectors allow sustained wide open throttle use and a redesigned diverter valve provides long life under high temperature conditions.

Tired of searching for all the components necessary in a turbo upgrade? We’ve eliminated the hassle by including all the components necessary for increased performance and OE reliability.

Included in the kit are as follows:
• State-of-the-Art turbine design
• High-flow Fuel Injectors
• Redesigned diverter valve
• ECU Upgrade
• STaSIS Silicone Hoses
• All gaskets & hardware included

Brake

ALCON MONOBLOCK UPGRADE FROM STASIS ENGINEERING

2008/10/27 evogarage

stasis brake hat alcon rotor
alcon monobloc caliper

alcon brake pad

This setup is to be fitted the MkV Golf GTI.
• ALCON 4 Piston Monobloc Calipers
• ALCON 355mm x 28mm(14") Floating Rotors
• STaSIS Brake Hats
• STaSIS Caliper Mounting Bracket & Hardware
• Goodridge Stainless Steel Braided Lines
• Motul brake fluid
• SBS Hi Performance Brake Pads

The gravity die cast Monobloc caplipers are constructed of aluminum alloy providing improved rigidity and weight savings. The increased rigidity combined with braided stainless brake lines provides a linear, confidence inspiring pedal feel.

An internal veined design aides in dissipating the thermal energy (heat) associated with repeated heavy brake use. This technology is paramount in a racing situation, and the advanced cooling helps avoid warping – which can cause instability in high-speed or emergency stops.

The unique slotted crescent design avoids degraded brake performance due to pad-gassing. In addition, the slotted crescent technology is less susceptible to the cracking associated with cross-drilled rotors.